spectrum rotate and H/V rotate

Discuss here all technical and scientific questions about the processing of ambient vibrations for site characterization (H/V, Array methods,...)
farshad
Posts: 7
Joined: Tue Aug 14, 2007 3:45 am
Location: ZAPCE, Tehran, Iran
Contact:

spectrum rotate and H/V rotate

Postby farshad » Tue Apr 29, 2008 10:49 am

Dear Marc
I will realy appreciate it, if you could please explain about spectrum rotate and H/V rotate and what ever we may understand about the diagrams coming from the results.
Thanks
Regards
Farshad

admin
Site Admin
Posts: 417
Joined: Mon Aug 13, 2007 11:48 am
Location: ISTerre
Contact:

Postby admin » Sun May 04, 2008 7:55 pm

Hi Farshad,

For the spectrum rotate, frankly speaking, I don't know precisely its application. It represents the spectrum power in all directions.

For H/V rotate, you can observe whether the H/V spectrum is the same for all orientations or not. If it is constant, there are good chances that the ground structure is 1D and that the noise wave field is homogeneous. In practice, this is not the case, the H/V shows slight differences between distinct azimuth. It can come from a non-symmetric wave field or from the structure itself. Alone the H/V is not able to distinguish those two phenomenons.

These are relatively new tools, maybe from practical experience more interesting information can be extracted.

Cheers,

Marc


Return to “Ambient vibration techniques”

Who is online

Users browsing this forum: No registered users and 1 guest